Description

Carbon Dioxide Fire Suppression System, with Kidde Fenwal Model 2320 Contro  for sale

This is a used carbon dioxide fire suppression system, with a battery tested Fenwal 2320 control panel. We have only tested the Fenwal 2320 control panel with the two 12 volt batteries included in the panel. The leds all light up, and then the green power led remains on after power up. There are several wires coming out of the control box. We have not determined the 110 output for the Fenwal, since the unit appears to have customized wiring.  We have not tested this item any further than the Fenwal 2320, as these cabinets can be built in several modes for specific operation/actuation. This item has a location for a Fenwal FM-200 clean tank. The system contains a fire signal relay, as well as an 8 position dual terminal panel, and a third relay. These are all mounted on the top backside of unit. There are also two 1 3/4 inch diameter ports on the side of unit, along with an additional ten 3/4 inch ports, in which two are being used. These two are labeled CO1 and CO2. The system itself is in very good cosmetic condition, and has a stainless steel finish. There is one very small dent on the back of the unit. The Fenwal 2320 comes with the key for locking the control panel, and the cabinet includes easy pull type recessed handles, for both the upper and lower hinged doors. This unit could be used in many types of enviorments, such as control rooms, cold storage, clean rooms, data processing, healthcare, and more.

Manufacturer Description on the Fenwal 2320:

The 2320 is a low cost control panel that supervises and controls one fire suppression hazard. Microprocessor technology enhances reliability and field programmable versatility. The control unit is compatible with Fenwal FM-200® clean agent suppression systems. It meets requirements of NFPA 72 and–in addition to extensive listings–is approved for use in suppression systems covered by NFPA codes: 12, 12A, 17, 17A and 2001. The control panel provides 14 indicating status LEDs and 5 diagnostic LEDs. Field programmable options include: multiple time delays, 3 abort modes, single or cross zone operation, release circuit isolation, and a second alarm relay programmable to operate on actuation of 2nd cross zone or agent release.