Description

Cehisa Model OPTIM P Automatic Edgebander

Edgebanding Material:

Melamine / PVC / ABS / PP / veneer

Panel:

Thickness, min-max: 8-50 mm

Length, min-max: 200-unlimited mm

Width, min-max: 75-unlimited mm

Machine:

Working Speed, m/min: 5.5

Pre-milling cutters height: 30/50mm

Working air pressure: 6-7 kg/cm²

Total electrical output: 3,4 kW

Electrical connection: 3 x 220V, 60Hz

Dimensions installed: 2352mm x 1190mm x 1444mm

Net weight: 620Kg (1,400 lbs.)

Operation:

Timer controlled automatic feeding allows the precise adjustment of the in-feed surplus and minimizing the waste of edging material.

Pre-milling performed by two HF motors, one rotating CCW and second rotating CW, with pneumatic pressure control providing an optimum finish.

Newly designed glue application unit with improved thermodynamics grants a shorter heating time with less power consumption. Automatic temperature control by electronic thermostat prevents glue from scorching while the machine is idle.

A group of 2 pressure rollers exert pressure on the edge band in order to achieve its adhesion onto the panel edge.

Endtrimming by single support/single carriage/single through shaft HF motor with one milling head performs the front and rear trim cut cycles.

Separate top and bottom trimming units machine the excess edgebanding along the upper and lower edges of the panel.