Description

Friulmac Frimat-DI

Specifically Designed for Drill and Dowel Processing for Kitchen Cabinet Doors Stiles & Rails

Loading Area Specifically Designed to Hold Either Four Rails, Two Stiles, or One Extra Long Stile

Working Dimensions

Min-Max Length: 2.5″ – 59″

Min-Max Width: 1.5 – 38″

Min-Max Thickness: 0.5″ – 1.5″

Working Units:

Upper/Lower Edge Units (CNC) – 1.5 kW (2HP) @ 9000-12000 RPM

Glue Insertion Unit R-4

Tank Capacity: 2 Kg

Glue Type: Ac. Vinile

Minimum Film Formation Temperature – 3 Degrees Celsius

Glue Viscosity – mPa.s 400/500

Ph Value (20 Degrees Celcius) – 6-7.5 Ph

Manual tilt – +/- 5 Degrees

Dowel Insertion Station

Maximum Capacity of Dowel Tank – 5 Kg

Minimum Distance between 2 Consecutive Dowels – 16mm

No. of Dowel Inserts – 1

Tolerance of Dowel on Diameter – +/- 0.1

Tolerance of Dowels on Length – +/- 0.2

Total Unit Power – 6 kW (8Hp)

Full Load Current – 13 Amp

Working Air Pressure: 6 Bar

Safety Enclosure

Push Button Controls

HMI Control Panel

Current Voltage – 460V 3Ph