Description

Friulmac MDF Wrapped Kitchen Cabinet Door Low Volume Cell

Cell Consists of Stock Numbers 19201N, 19202N, and 22516N

Friulmac Frimat-EB

Stand-Alone Machine Configured for Stiles Edgebanding Processing

Working Dimensions:

Min-Max Length: 3.5″ – 59″

Min-Max Width: 1.5″ – 7.9″

Min-Max Thickness: 0.5″ – 1.5″

Working Units:

Max Roll Diameter: 2.625″

Independent Glue Spreader: Glue Type – EVA

Automatic Feed Speed Syncronization

Pneumatic Guillotine

Automatic Edge Detection

Rubber Roll Edge Applicators

3 Steel Rolls Edge Fixing

Min-Max Edge Thickness: 0.3mm – 3mm

Max Feed Rate: 49.2 Ft/Min

Cutting Accuracy @ 49.2 Ft/Min: +/- 3mm

Min-Max Edge Height: 14mm – 45mm

Min Edge Length: 60mm

Total Unit Power: 27 kW

Full Load Power: 52 Amp

Working Air Pressure: 6 Bar

Push Button Controls

HMI Control Panel

Safety Enclosure

Current Voltage: 460V 3PH

Fruilmac Frimat-FP-3WS

The Purpose of the machine is to perform precision machining such as milling or mortising of Profiled-Wrapped Cabinet Door Rails, plus Foiling

Working Dimensions

Min-Max Length: 2″-59″

Min-Max Width: 1.5″-7.9″

Min-Max Thickness: 0.5-1.5

Working Units:

Upper/Lower Edge Units (CNC): Electric Motor – 5 kW (6.7HP) @ 9000-12000.

Thermoprinting Unit T “Borgonovo” (2nd & 3rd Station)

External Diameter – 200mm (7.875″)

80 Shore Buffer Diameter – 190mm (7.5″)

Copier Diameter – 200mm (7.875″)

No. Resistances – KW 0.5×6

Rotation Motor Unit Power – 0.09 kW

Motor Power – 0.09 kW

Pre-Torque Head Motor Power – 0.22 kW

Total Machine Power – 13 kW

Full Load Current – 24 Amp

Working Air Pressure – 6 Bar

Pedal Safety Switch.

Push Button Controls

HMI Control Panel

Safety Enclosure

Current Voltage: 460V 3PH

Friulmac Frimat-DI

Specifically Designed for Drill and Dowel Processing for Kitchen Cabinet Doors Stiles & Rails

Loading Area Specifically Designed to Hold Either Four Rails, Two Stiles, or One Extra Long Stile

Working Dimensions

Min-Max Length: 2.5″ – 59″

Min-Max Width: 1.5 – 38″

Min-Max Thickness: 0.5″ – 1.5″

Working Units:

Upper/Lower Edge Units (CNC) – 1.5 kW (2HP) @ 9000-12000 RPM

Glue Insertion Unit R-4

Tank Capacity: 2 Kg

Glue Type: Ac. Vinile

Minimum Film Formation Temperature – 3 Degrees Celsius

Glue Viscosity – mPa.s 400/500

Ph Value (20 Degrees Celcius) – 6-7.5 Ph

Manual tilt – +/- 5 Degrees

Dowel Insertion Station

Maximum Capacity of Dowel Tank – 5 Kg

Minimum Distance between 2 Consecutive Dowels – 16mm

No. of Dowel Inserts – 1

Tolerance of Dowel on Diameter – +/- 0.1

Tolerance of Dowels on Length – +/- 0.2

Total Unit Power – 6 kW (8Hp)

Full Load Current – 13 Amp

Working Air Pressure: 6 Bar

Safety Enclosure

Push Button Controls

HMI Control Panel

Current Voltage – 460V 3Ph