Description

Italpresse Model SP/1-A Automatic Through Feed Case Clamp

Maximum working depth: .700 mm (27.6“)

Minimum working depth: 250 mm (9.8”)

Maximum working length: 2,500 mm (98”)

Minimum working length: 300 mm (11.8”)

Maximum working height: 1,220 mm (48”)

Minimum working height: 300 mm. (11.8”)

Maximum through-feed clearance: 750 mm (29.5”)

Air consumption @ 6 bar pressure: 100 liters/cycle (3.53 cu. ft./cycle)

Total loading belt length: 5,500 mm (18’)

Loading belt drive power: 0.5 hp.

Maximum loading belt speed: 30 m/min (92 fpm)

Automatic loading and unloading of cabinet boxes by inverter controlled motorized conveyor belt

Electronic reading of cabinet dimensions with full automatic adjustment of the vertical and horizontal clamping beams

Pneumatic activated clamping action with adjustable control of the clamping speed and pressure

Two torsion bars controlled by four heavy-duty toothed belts maintain the parallelism of the top platen during movement and clamping

The side clamping bars at the out-feed end are installed on the fixed frame of the machine to assure perfect squaring of the cabinet during the clamping cycle

Three operation modes – manual, semi-automatic (requires the operator to press a foot pedal to initiate loading / unloading after the automatic clamping cycle is complete), and automatic (automatic loading / unloading without input from the operator)

Automatic cycle timer

Adjustable pressure controls

Safety light barrier on the front side and fixed safety screens on the rear side

480 volts / 3 phase / 60 hz

UL approved electrical components