640L II Skidder Large large a6a5

The John Deere 220 SL PrecisionCut™ Walk Greens Mower is a top-of-the-line solution engineered for meticulous mowing on golf course greens and fine turf areas. Featuring PrecisionCut™ technology, it ensures an impeccable and consistent cut for pristine playing surfaces. Its walk-behind design offers superior maneuverability and control, allowing operators to navigate with precision around obstacles and contours. With precision-engineered components, the 220 SL delivers reliable performance and durability, meeting the rigorous demands of golf course maintenance. Backed by John Deere’s renowned reputation for quality and innovation, the 220 SL PrecisionCut™ Walk Greens Mower is the trusted choice for golf course professionals seeking unparalleled turf aesthetics and playability.

  • Adjustable, loop-style handlebar for maximum comfort and control
  • Rubber isolators for reduced vibration
  • Easily accessible bedknife-to-reel adjustment

Product Features for John Deere 220 SL PrecisionCut™ Walk Greens Mower: 

  1. Worm Gear Drives: The system utilizes worm gear drives located in the front-roller castings. These worm gear systems are rotated via hex bolts on the side of the rear-roller castings. By turning these hex bolts, technicians can adjust the roller up and down. Each full turn of the hex bolt represents an adjustment of 0.001 inches (0.0254 mm).
  2. Connecting Rod: The true secret to the system is the connecting rod that ties the worm gear systems for the roller tower together. This connecting rod ensures that turning the height-of-cut adjuster on one side automatically turns the other side by the exact same amount.
  3. Spring Loaded: The connecting rod is spring-loaded, allowing it to be easily removed if both towers need to be adjusted independently.
  4. Quick Adjustment: Once the roller is paralleled to the front roller during initial setup, the Speed Link system takes over, allowing for quick one-point height-of-cut adjustments by turning the height-of-cut adjuster on one side.
  5. Tool Compatibility: Adjustments can be made using a variable-speed electric or air drill with a 16-mm socket attached, making the process even easier and quicker.

Product Specifications for John Deere 220 SL PrecisionCut™ Walk Greens Mower: 

  • Engine:
    • Type: Air-cooled, Gas
    • Horsepower: At 3600 rpm: 2.4 kW (3.2 hp)
    • Cycle: 4-cycle
    • Bore and Stroke: 60×42 mm (2.36×1.65 in)
    • Piston Displacement: 122 cc (7.4 cu in)
    • Compression Ratio: 8:5:1
    • Direction of Rotation of Output Shaft: Counterclockwise viewed from shaft side
    • Inclination Limit: Tilted up to 20 degrees in any direction
    • Idle Speed at Output Shaft: 1700 (+/- 100) rpm
    • Maximum Speed at Output Shaft: 2950 (+/- 150) rpm
    • Tank Capacity: 2.5 L (0.66 U.S. gal)
    • Fuel Type: Regular grade unleaded or leaded
    • Oil Capacity: SAE 30 or SAE 10W-30, 0.6 L (0.63 U.S. qt)
  • Cutting Equipment:
    • Cutting Width: 55.9 cm (22 in)
    • Frequency of Clip Standard: 11 blade, 14 blade: 4.62 mm (0.182 in), Optional speed up kit 11 blade, 14 blade: 3.94 mm (0.155 in)
    • Reel Diameter: 127 mm (5 in)
    • Number of Blades: 11 or 14 blade
    • Material: Heat-treated chromium molybdenum steel
  • Brush:
    • Interlocked with reel, rotation in reverse direction
    • Diameter: 60 mm (2.375 in)
    • Adjustable Brush or Cutter Height: Brush even with height-of-cut; GTC below height-of-cut maximum: 0.8 mm (0.0313 in)
    • Gear Drive: Gear driven from reel shaft, opposite direction of reel, rotation powers brush or vertical cutter
  • Rotary Brush and Greens Tender Conditioner (Optional):
    • Size: 2.7 kg (6 lb)
    • Type: Polyethylene
  • Grass Catcher:
    • Transport: Belt tension
    • Reel Jaw-type Clutch: On/off
    • Brush/GTC Jaw-type Clutch: On/off
    • Traction Drum: Dual, aluminum
  • Clutches:
    • Forward Speed: With transport wheels at 3000 engine rpm: 7.2 km/h (4.5 mph)
  • Rollers:
    • Rear: Aluminum, diameter: 190 mm (7.5 in)
    • Front: Machined steel, diameter: 50 mm (2 in, for cutting height adjustment)
  • Traveling Device:
    • Length (with tires installed): 940 mm (37 in)
    • Width (with tires installed): 94.6 cm (37.25 in)
    • Height (with tires installed): 119 cm (47 in)
    • Weight (less GTC’s, gear drive and transport wheel, with catcher): 99.5 kg (219 lb)
  • Sound Levels:
    • Operator ear: 82 dBA
    • Measuring standard: ISO 11201
    • Certificate type: ANSI B71.4-2004
  • Attachments Installed: GTCs, reels engaged

Further information on this machine can be viewed by visiting this link + 

Do you have one of these or similar for sale? Please click here start to list your machine for sale today. 

DISCLAIMER: The information that has been provided in this article is sourced from https://www.deere.com. The author does not assume any responsibility or liability for the accuracy, completeness, or usefulness of the information provided. The author shall not be held liable for any loss or damage resulting from the use of this content. For further information please contact the manufacturer directly.