Introducing the John Deere 2032R Compact Tractor! It’s designed for bigger projects, providing greater speed and capacity to handle larger tasks. The added weight of this model ensures enhanced stability for tackling tough jobs.
The 2032R Compact Utility Tractor is your go-to choice for significant tasks. Whether you need to build a fleet, clear snow from paths, sweep sidewalks, trim brush, or stack small bales in the barn, this tractor has got you covered.
- Compatibility with 60D and 72D AutoConnect™ Drive-Over Mower Decks
- Standard Four-Wheel Drive (4WD), Cruise Control, & Folding ROPS (Roll-Over Protective Structure)
- iMatch™ Compatible for versatile use on various applications.
Product Features of 3038E:
Engine Specifications:
1. 3025E Tractor:
- Engine: 3TNV88F-EPJT1 Yanmar® diesel engine
- Displacement: 1.642 L (100.2 cu in.)
- Power: 18.2 kW (24.4 hp) at 2400 rpm
- PTO Power: 13 kW (17.4 hp)
2. 3032E Tractor:
- Engine: 3TNV88C-NJT Yanmar diesel engine
- Displacement: 1.642 L (100.2 cu in.)
- Power: 22.9 kW (30.7 hp) at 2500 rpm
- PTO Power: 18.6 kW (25 hp)
3. 3038E Tractor:
- Engine: 3TNV86T-NJT Yanmar diesel engine
- Displacement: 1.568 L (95.68 cu in.)
- Power: 27.4 kW (36.7 hp) at 2500 rpm
- PTO Power: 22.4 kW (30 hp)
Engine Features:
- Uses the latest technologies for fuel optimization, control, and accuracy.
- Common Rail System (CRS) optimizes fuel economy and reduces operating costs.
- Electronic Control Unit (ECU) ensures optimum fuel control and accuracy.
- After-treatment system with Diesel Particulate Filter (DPF) for environmental impact reduction.
- Filter cleaning processes include passive, active, and parked filter cleaning.
Key Engine Features:
- Economical cast-in-block cylinder design for good cooling.
- Direct fuel injection for improved starting and combustion efficiency.
- Aluminum alloy pistons for reduced bearing loads and better heat transfer.
- Timing gears with a helical profile to reduce engine noise.
- Auto-bleed fuel system for easy fuel recovery after running out of fuel.
- High-capacity lubrication system for filtered oil under pressure.
Hydrostatic Transmission (HST):
- Two-range hydrostatic transmission for fast and easy direction changes.
- Twin Touch™ foot pedals for quick forward/reverse operation.
- Safety features include starting only in neutral, engine shutdown if the operator leaves the seat, and more.
Operator Station:
- Clean and simple design with color-coded controls.
- Comfortable contoured seat with adjustable position.
- Operator presence system for safety.
- Left-side step for easy entry/exit.
Safety Features:
- Roll-Gard ROPS for operator safety, with optional canopy available.
- Two-spool rear selective control valve (SCV) for superior implement performance.
- iMatch™ Quick-Hitch feature for easy implement hookup.
- Excellent serviceability with easy access to service points.
Service and Maintenance:
- Easy access to service points with quarter turn fasteners.
- Onboard self-diagnostic capabilities.
- Hydraulic oil service interval increased to 1200 hours.
Product Specifications & Compare:
Engine:
- Manufacturer: Yanmar
- Model: 3TNV86CT-NJT2
- Power (Gross): 27.4 kW (36.7 hp) at 2500 rpm
- Power Take-Off (PTO): 22.4 kW (30 hp)
- Displacement: 1.57 L (95.7 cu in.)
- Number of Cylinders: 3
- Aspiration: Turbocharged
- Emissions Compliance: Final Tier 4
- Cylinder Liners: Cast-in-block
- Bore and Stroke: 86 x 90 mm (3.4 x 3.54 in.)
- Compression Ratio: 19.1:1
- Cooling System: Water Pump
- Air Cleaner: Dual element
- Fuel Tank Capacity: 28.5 L (7.5 gal.)
Electrical:
- Battery Size: 500 CCA
- Alternator: 55 amp
- Starter Size: 1.4 kW (1.9 hp)
Transmission:
- Type: Hydrostatic Transmission (HST)
- Left-Hand Reverser: No
- Final Drive: Spur Gear
- Brakes: Wet Disk
- Steering: Power Steering
- Differential Lock: Yes
- Cruise Control: Optional
Hydraulics:
- Pump Rated Output:
- Steering: 15.0 L/min (4.0 gpm)
- Implement: 20.2 L/min (5.3 gpm)
- Pump Type: Dual Gear
- Maximum Operating Pressure: 172 bar (2495 psi)
- Draft Control Sensing: Position Control
- Remote Control Valves: Up to two (optional)
- 3-Point Hitch Type: Category 1
- Lift Capacity (24-in. Behind Link Arms): 615 kg (1356 lb)
Power Take-Off (PTO):
- Type: Rear – 540 rpm
- Control: Independent
- Clutch: Wet Disk
- Brake (for Mid and Rear PTO): Wet Disk
Fluid Capacities:
- Crankcase with Filter: 4.5 L (4.8 gal.)
- Transmission and Hydraulic System: 20.8 L (22 qt.)
Dimensions:
- Wheelbase: 1593 mm (62.7 in.)
- Front Axle Clearance:
- Minimum: 299 mm (11.8 in.)
- Maximum: 333 mm (13.1 in.)
- Turning Radius Without Brakes: 2.9 m (9.4 ft)
- Approximate Shipping Weight (Open-Station; Cab): OOS: 1210 kg (2668 lb), Cab: Not applicable
Tires:
- Front:
- R1 Bar: 7-14
- R3 Turf: 27×8.5-15
- R4 Industrial: 25×8.5-14
- R4 Industrial: 27×8.5-15
- Rear:
- R1 Bar: 11.2-24
- R3 Turf: 41×14-20
- R4 Industrial: 15-19.5
- R4 Industrial: 43×16-20
Further information on this machine can be viewed by visiting this link https://www.deere.com/en/tractors/compact-tractors/3-series-compact-tractors/3038e/
Do you have one of these or similar for sale? Please click here start to list your machine for sale today.
