The John Deere 6700A PrecisionCut™ Fairway Mower is a top-tier turf maintenance machine engineered to provide precision and efficiency on golf course fairways. With advanced cutting technology and ergonomic design, this mower ensures exceptional results while prioritizing operator comfort and ease of use. Powered by a robust engine and featuring a wide cutting width tailored for fairway maintenance, the 6700A delivers excellent coverage and uniform cutting performance. Its adjustable cutting height and contour-following capabilities enable precise turf grooming, enhancing the overall aesthetics and playability of the course. Built with durability and reliability in mind, this mower can withstand the rigors of daily use on golf courses, ensuring consistent performance over time. In summary, the John Deere 6700A PrecisionCut™ Fairway Mower is a trusted choice for golf course professionals seeking excellence in turf maintenance.
- 24.7 hp FT4 compliant Liquid-Cooled Diesel Engine
- 22” QA7 Cutting Units for a 100” total Width of Cut
- 3-wheel, smooth tire configuration with standard GRIP All-Wheel Drive
- Passcode-protected TechControl display
Product Features for John Deere 6700A PrecisionCut™ Fairway Mower:
QA7 Electric Reel Drive System:
- Electric Reel Design:
- Eliminates 90% of hydraulic leak chances by removing 150 leak points.
- Up to 30% fuel savings on the 7700A E-Cut™ Hybrid, and 21% on the 6700A E-Cut Hybrid.
- Up to 3dB(A) reduction in sound levels at reduced throttle.
- Smart Alternator:
- Innovative 56-volt, 240-amp alternator for power in mowing, verticutting, and scalping.
- Belt-driven from the engine, no additional batteries required.
- Integrates with LoadMatch™ to sense load and adjust traction speed for cut quality.
- QA7 Electric Reel Motor:
- Updated design for Quick-Adjust 7 (QA7) applications.
- Longer cooling fins for optimal cooling.
- Larger internal bearing design for handling tough loads.
Diesel Engine:
- Powerful Engine:
- 3-cylinder, 18.4-kW (24.7-hp) Final Tier 4 (FT4) diesel engine.
- No use of diesel oxidation catalyst (DOC) or diesel particulate filter (DPF) for lower upfront costs.
- Powers undulating conditions, fairway tender conditioners, and rear roller power brushes.
- Air-Intake System:
- Designed to pull clean air from the front, improving engine performance during dusty conditions.
Three-Wheel Stance and Smooth Tires:
- Innovative Tire Design:
- Smooth tire design minimizes compaction and tire marking, especially in turns.
- GRIP all-wheel drive traction system for a greens-quality appearance without sacrificing traction.
- Three-wheel stance for excellent maneuverability and tight turns at the end of passes.
- Treaded Tire Option:
- Fairway tread available for those who prefer treaded tires.
TechControl Display:
- Control and Diagnostics:
- Password-protected settings for control and operation.
- Large, easy-to-read screen for adjustments.
- Onboard visual diagnostics for quick troubleshooting.
- Service timers for maintenance notifications.
- Language Settings:
- Multilingual options for TechControl.
- Operator Warnings:
- Alerts for real-time problem identification during operation.
GRIP All-Wheel Drive Traction System:
- Standard Equipment:
- Transfers hydraulic flow from slipping wheels to those with grip.
- Maintains maximum traction in undulating conditions.
- Standard on specified PrecisionCut™ and E-Cut™ Hybrid Fairway Mowers.
- Engaged at all times, in mow or transport.
Product Specifications for John Deere 6700A PrecisionCut™ Fairway Mower:
- Maximum Rated Horsepower:
- At 3000 rpm: 24.7 hp (18.4 kW)
- High idle 3200 rpm
- Drive Pump:
- Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
- Ground Pressure:
- 69 kPa (10 psi)
- Throttle:
- Hand throttle
- Operator Display:
- TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on a large easy-to-read screen; quick on-the-go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
- Mowing Speed:
- 0 to 12.8 km/h (0 to 8.0 mph)
- Cutting Unit Size:
- Quick Adjust QA5: 55.9 cm (22 in.)
- Total Width of Cut:
- 254 cm (100 in.)
- Reel Diameter:
- 17.8 cm (7 in.)
- Frequency of Clip (FOC Reels) OR Blade Tip Speed (Decks):
- 10- Blade: 1.04 mm/km/h, 0.066 in./mph
- 8-Blade: 1.30 mm/km/h, 0.083 in./mph
Engine:
- Type:
- Indirect Inject Diesel
- Compliant Emission Regulation:
- United States and Canada Final Tier 4, EU Stage V
- Horsepower:
- Maximum rated horsepower at 3000 rpm: 24.7 hp (18.4 kW)
- High idle 3200 rpm
- Cylinders:
- Three
- Displacement:
- 1.267 L (77.32 cu in.)
- Air Cleaner:
- 2-stage dry element
- Fuel:
- Diesel Up to B20 compliant
- Cooling System:
- Liquid centrifugal pump; forward machine location for optimum cooling
Hydraulic System:
- Drive Pump:
- Axial piston, electronically controlled hydrostatic traction pump; dual gear pumps for steering, lift, mow, and charge
- Hydraulic System Capacity:
- 37.8 L (10 U.S. gal.)
Fuel System:
- Fuel Tank Capacity:
- 60.6 L (16 U.S. gal.)
Steering:
- Type:
- Hydraulic power with double-acting steering cylinder
Tires:
- Front Drive Tires:
- 26.5×14-12 smooth
- Steering Tires:
- 24×13-12 smooth
Brakes:
- Type:
- Internal hydraulic wet disc brakes with dynamic braking through closed-loop hydrostatic system
ROPS:
- Standard; meets ISO 21299 Standard
Vehicle:
- Cutting Units Lowered:
- 1181 kg (2598 lb)
- Canopy, FTCs, and Power Brushes installed, full fuel
Operator Controls:
- Throttle:
- Hand throttle
- Forward/Reverse:
- 2-pedal electronic control of eHydro system
- Mower Lift:
- One-touch single handle
- Parking Brake:
- Electric Switch on Command Arm for Internal Wet Disk Brakes
- Seat:
- Suspension seat with seat belts and armrest; fore/aft adjustment; weight and lumbar adjustment
- PTO:
- Electric Switch on Command Arm
- Tilt Steering:
- Left Foot operated for easy adjustment
Operator Display:
- TechControl Display: Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy-to-read screen; quick on-the-go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected
Storage:
- Cup holder; two-way radio; large operator storage located on the left-hand side of the operator station
Controls:
- Height with ROPS:
- 217.3 cm (85.6 in.)
- Length:
- 307.2 cm (121 in.)
Transport Dimensions:
- Width:
- 219 cm (86.2 in.)
- Mowing Position Width:
- 287 cm (113 in.)
Ground Speed:
- Mowing:
- 0 to 12.8 km/h (0 to 8.0 mph)
- 4WD mow speed: N/A
- Transport:
- 0 to 16.1 km/h (0 to 10.0 mph)
- Reverse:
- 0 to 9.7 km/h (0 to 6.0 mph)
Dimensions:
- Number of Cutting Units:
- Five
- Size of Cutting Units:
- Quick Adjust QA5: 55.9 cm (22 in.)
- Total Width of Cut:
- 254 cm (100 in.)
- Height of Cut (Construction):
- 6.3 to 50.8 mm (0.25 to 2 in.)
Frequency of Clip (FOC Reels) OR Blade Tip Speed (Decks):
- Rollers (Front and Rear):
- 76.2 mm (3 in.) at 1600 reel speed (engine high idle)
- Frequency of Clip (FOC Reels) OR Blade Tip Speed (Decks):
- 10- Blade: 1.04 mm/km/h, 0.066 in./mph
- 8-Blade: 1.30 mm/km/h, 0.083 in./mph
Reel Diameter:
- 17.8 cm (7 in.)
Cutting Units:
- Measuring Standard:
- ISO 11201
- Attachments Installed:
- FTCs, reels engaged
Sound Levels:
- Two-year limited
Warranty:
- ANSI B71.4-2012
Further information on this machine can be viewed by visiting this link https://www.deere.com/en/mowers/fairway-mowers/6700a-precisioncut-fairway-mower/
Do you have one of these or similar for sale? Please click here start to list your machine for sale today.
