Looking for a larger and powerful yet cost-efficient dozer? The D85EXi-18 is an excellent choice. Its features include an 11-liter engine, a large-capacity power-pitch blade, a fuel-efficient automatic shift transmission, and an economical PLUS (Parallel Link Undercarriage System) rotating bushing undercarriage option.
- Quick training for new operators
- Efficient transition from mass excavation to finished grading
- Seamless integration of 3D design data
- Empowered operators for efficient and consistent performance
Product Features and benefits:
Advanced Machine Control
The dozer features machine logic that continuously learns the terrain, making calculated decisions for the next pass. Intelligent Machine Control (IMC) significantly reduces the skill gap between new and experienced operators.
Nearly 100% Machine Control Auto Usage
In specific situations like auto stripping, rough dozing, spreading, and advanced finish grading, operators can opt for nearly 100% machine control auto usage. This includes the application of automatic control without the need for a 3D model.
Machine Learning from Operator Input
Automatic functions empower the dozer to learn from the operator’s blade input. This results in increased adaptability, easier operation, and reduced reliance on direct operator input.
Outstanding Blade Response for Finish Grading
Intelligent Machine Control (IMC) ensures exceptional blade response for finish grading. The dozer can anticipate grade transitions, allowing it to alter the blade angle accordingly and deliver unparalleled grading performance.
Product Specifications for D85EXi-18:
Engine:
- Model: Komatsu SAA6D125E-7
- Type: 4-cycle, water-cooled, direct injection
- Aspiration: Komatsu variable geometry turbocharged, air-to-air aftercooled
- Number of Cylinders: 6
- Bore x Stroke: 4.49 in x 5.69 in
- Piston Displacement: 674 in³
- Governor: All-speed and mid-range, electronic
- Horsepower:
- SAE J1995 / Gross: 267 HP
- ISO 9249 / SAE J1349* / Net: 264 HP
- Rated RPM: 1,900 rpm
- Fan Drive Type: Hydraulic
- EPA Tier 4 Final emissions certified
TORQFLOW Transmission:
- Water-cooled, 3-element, 1-stage, 1-phase
- Planetary gear, multiple-disc clutch transmission
- Electronically controlled, hydraulically actuated
- Shift lock lever and neutral safety switch
- Travel Speed (Forward / Reverse):
- 1st: 2.1 mph / 2.7 mph
- 2nd: 3.8 mph / 5.0 mph
- 3rd L: 4.8 mph / 5.7 mph
- 3rd: 6.3 mph / 8.1 mph
Steering System:
- Palm Command Control System (PCCS) lever controls
- Hydrostatic Steering System (HSS) powered by steering planetary units and an independent hydraulic pump and motor
- Counterrotation turns available
- Wet, multiple-disc, pedal-controlled service brakes
- Gear shift lock lever applies parking brake
- Minimum Turning Radius:
- D85EXi-18: 6 ft. 6 in
- D85PXi-18: 7 ft. 3 in
Undercarriage:
- Suspension: Oscillating equalizer bar and pivot shaft
- Track Roller Frame: Monocoque, large section, durable construction
- Rollers and Idlers: Lubricated
- Track Shoes: Lubricated tracks with unique seals
- Number of Track Rollers (each side): 7
- Type of Shoes (Standard): Single grouser
- Number of Shoes (each side): 41
- Grouser Height: 2.8 in
- Shoe Width (Standard): 26 in
- Ground Contact Area (ISO 16754): 7,120 in²
- Ground Pressure (Tractor) (ISO 16754): 7.5 psi
- Track Gauge: 6 ft. 7 in
- Length of Track on Ground: 10 ft.
Final Drives:
- Double-reduction final drive with spur and planetary gear sets
- Segmented sprocket teeth are bolt-on
- Triple labyrinth protects seals
Hydraulic System:
- Closed-center load sensing system (CLSS)
- Hydraulic Control Units externally mounted
- Piston type hydraulic pump with a capacity of 87.4 US gpm
- Relief Valve Setting: 3,270 psi
- Control Valves: Spool control valves for SIGMADOZER®, semi-u tilt, or straight tilt dozer
- Blade Lift: Raise, hold, lower, and float
- Blade Tilt: Right, hold, and left
- Rear Attachment: Raise, hold, and lower
Service Refill Capacities:
- Fuel Tank: 124.1 US gal
- DEF Tank: 6.2 US gal
- Coolant: 17.2 US gal
- Engine: 10.0 US gal
- Damper Case: 0.42 US gal
- Torque Converter, Transmission, Bevel Gear, and Steering System: 15.8 US gal
- Final Drive (each side) – D85EXi-18: 6.9 US gal
- Final Drive (each side) – D85PXi-18: 9.5 US gal
Operating Weight:
- Tractor Weight (Including ROPS cab, full fuel tank, operator, and standard equipment):
- D85EXi-18: 53,506 lbs.
- D85PXi-18: 57,849 lbs.
- Operating Weight (Including SIGMADOZER and fixed multi-shank ripper (EXi) or straight tilt dozer and long drawbar (PXi), ROPS cab, operator, standard equipment, full fuel tank, lubricant, hydraulic control unit, and coolant):
- D85EXi-18 SIGMADOZER: 67,439 lbs.
- D85PXi-18 straight tilt dozer: 65,080 lbs.
This equipment, with its powerful engine, advanced transmission, and robust hydraulic system, is well-suited for various earthmoving and construction applications. If you have any specific questions or need additional information, feel free to ask.
Further information on this machine can be viewed by visiting this link +
Do you have one of these or similar for sale? Please click here start to list your machine for sale today.
