Battery Scoop literature link 01ESV36 42

Acquire a powerful and economical dozer with exceptional flotation – the D85PXi-18. With its 11-liter engine, 14’ 4” straight tilt blade, fuel-efficient automatic transmission, and expansive footprint for soft ground conditions, it stands out. Additionally, there’s an option for an extended wear life undercarriage with 36” wide PLUS (Parallel Link Undercarriage System) rotating bushing track shoes.

  • Get new operators up to speed quickly
  • Go from mass excavation to finished grading faster than ever
  • Fully integrate 3D design data into your machines
  • Empower operators to work efficiently, pass after pass

Product Features and benefits:

Advanced Machine Control: In select situations like auto stripping, rough dozing, spreading, and advanced finish grading, operators can opt for nearly 100% machine control auto usage. This includes the ability to apply automatic control without the need for a 3D model.

A Machine that Learns from the Operator: Automatic functions empower the dozer to learn from the operator’s blade input. This results in increased adaptability, easier operation, and reduced reliance on continuous operator input.

Outstanding Blade Response for Finish Grading: Intelligent Machine Control (IMC) enables the dozer to deliver unparalleled grading performance. It looks ahead at grade transitions, allowing it to alter the blade angle accordingly for precise and efficient finish grading.

Product Specifications for D85PXi-18:

Engine:

  • Model: Komatsu SAA6D125E-7
  • Type: 4-cycle, water-cooled, direct injection
  • Aspiration: Komatsu variable geometry turbocharged, air-to-air aftercooled
  • Number of Cylinders: 6
  • Bore x Stroke: 4.49 x 5.69 in
  • Piston Displacement: 674 in³
  • Governor: All-speed and mid-range, electronic
  • Horsepower:
    • SAE J1995 / Gross: 267 HP
    • ISO 9249 / SAE J1349* / Net: 264 HP
  • Rated RPM: 1,900 rpm
  • Fan Drive Type: Hydraulic
  • EPA Tier 4 Final Emissions Certified

TORQFLOW Transmission:

  • Water-cooled, 3-element, 1-stage, 1-phase planetary gear, multiple-disc clutch transmission
  • Electronically controlled, hydraulically actuated, force-lubricated
  • Shift lock lever and neutral safety switch
  • Travel Speed (Forward/Reverse):
    • 1st: 2.1 mph / 2.7 mph
    • 2nd: 3.8 mph / 5.0 mph
    • 3rd L: 4.8 mph / 5.7 mph
    • 3rd: 6.3 mph / 8.1 mph

Steering System:

  • Palm Command Control System (PCCS) lever controls
  • Hydrostatic Steering System (HSS) powered by steering planetary units
  • Wet, multiple-disc, pedal-controlled service brakes
  • Gear shift lock lever applies parking brake

Undercarriage:

  • Suspension: Oscillating equalizer bar and pivot shaft
  • Track Roller Frame: Monocoque, large section, durable construction
  • Rollers and Idlers: Lubricated
  • Track Shoes: Lubricated, Single grouser
  • Number of Track Rollers (each side): 8
  • Number of Shoes (each side): 45
  • Grouser Height: 2.8 in
  • Shoe Width (standard): 36 in
  • Ground Contact Area (ISO 16754): 10,970 in²
  • Ground Pressure (Tractor, ISO 16754): 5.2 psi
  • Track Gauge: 7 ft. 5 in
  • Length of Track on Ground: 11 ft. 5 in

Final Drives:

  • Double-reduction final drive of spur and planetary gear sets
  • Segmented sprocket teeth are bolt-on
  • Triple labyrinth protects seals

Hydraulic System:

  • Closed-center load sensing system (CLSS)
  • Hydraulic control units externally mounted
  • Piston type hydraulic pump with a capacity of 87.4 US gpm at rated engine rpm
  • Relief Valve Setting: 3,270 psi

Service Refill Capacities:

  • Fuel Tank: 124.1 US gal
  • DEF Tank: 6.2 US gal
  • Coolant: 17.2 US gal
  • Engine: 10.0 US gal
  • Damper Case: 0.42 US gal
  • Torque Converter, Transmission, Bevel Gear, and Steering System: 15.8 US gal
  • Final Drive (each side) – D85EXi-18: 6.9 US gal
  • Final Drive (each side) – D85PXi-18: 9.5 US gal

Operating Weight:

  • Tractor Weight:
    • D85EXi-18: 53,506 lbs.
    • D85PXi-18: 57,849 lbs.
  • Operating Weight (Including SIGMADOZER or Straight Tilt Dozer):
    • D85EXi-18 SIGMADOZER: 67,439 lbs.
    • D85PXi-18 Straight Tilt Dozer: 65,080 lbs.

These bulldozers are designed for heavy-duty tasks, offering advanced features and performance. If you have any specific questions or need additional information, feel free to ask.

Further information on this machine can be viewed by visiting this link https://www.komatsu.com/products/dozers/large-dozers/d85pxi-18

Do you have one of these or similar for sale? Please click here start to list your machine for sale today. 

DISCLAIMER: The information that has been provided in this article is sourced from https://www.komatsu.com. The author does not assume any responsibility or liability for the accuracy, completeness, or usefulness of the information provided. The author shall not be held liable for any loss or damage resulting from the use of this content. For further information please contact the manufacturer directly.