Crafted for exceptional digging power and accelerated cycle times, the 2800XPC electric mining shovel is envisioned as the efficient, dependable, and cost-effective workhorse in your fleet. With an AC electrical system tailored for rapid material movement, the 2800XPC is constructed to provide years of reliable service even in challenging environments.
- Low cost per tonne loading
- Designed to deliver high cutting forces
Product Features and benefits:
Compact Powerhouse
Experience big machine systems in a compact package with the P&H 2800XPC. You get state-of-the-art components, including the advanced Centurion electrical control system and a robust drive, all packed into a smaller yet powerful shovel.
Stability Throughout the Dig Cycle
Designed for handling hard materials and penetrating the bank efficiently, the P&H twin leg handle ensures stability throughout the dig cycle. It focuses energy and cutting force, preventing energy wastage through unnecessary twisting or rotating of the dipper.
Latest Dipper Technology
The 2800XPC features the latest in dipper technology, making it one of the hardest working components on your shovel. With a low maintenance latching system, optimal toe penetration digging, and the ability to match shovels with trucks, it ensures efficiency and reliability.
Product Specifications for 2800XPC:
Working Ranges:
- Height of cut: 54 ft. 6 in
- Radius of cut: 79 ft. 3 in
- Dumping height* (door open): 30 ft. 0 in
- Floor level radius: 53 ft. 9 in
- Tail swing radius: 32 ft. 6 in
- Operator eye level: 31 ft. 4 in
- *Height shown with bail-type dipper. Heights will be greater with bail-less or compact-bail dippers. Actual dumping height can be greater than door clearance height
Capacity:
- Nominal payload*: 65.0 st
- Nominal dipper capacity SAE struck: 35.0 – 44.0 yd³
- Rated suspension load: 135.0 st
- Optimum truck size (218 mt (240 st) truck shown): 190 – 265 st
- *Payload and dipper capacity are dependent on many factors. Contact Komatsu Mining for an analysis of your specific application.
Power Requirements:
- Supply voltage*: 4,160 or 7,200 V, 3 phase, 60 Hz
- Supply voltage*: 5,000, 6,000 or 6,600 V, 3 phase, 50 Hz
- Supply transformer (minimum): 2,750 kVA
- Minimum short circuit VA available at shovel: 22 MVA
- *Voltage per customer requirements
Propel:
- Propel on demand provides rapid transfer to propel mode for faster cycle times and more efficient digging.
- Two rugged P&H planetary gear cases independently transmit torque to the drive sprockets.
- Delta drive low tension sprocket drive system with heavy-duty cast crawler shoes.
- Spring-set air release disc brakes – one per motor.
Crowd:
- Powerband V-belt drive between motor and gear case absorbs shock loads.
- First and second reduction gearing in enclosed gear case for reliable splash lubrication, ease of maintenance, and extended component life.
- Twin-leg dipper handle with torsion box and rack and pinion drive.
- Spring-set air release disc brake.
Swing:
- Two modular P&H planetary gear cases and a single-piece forged swing gear transmit torque for fast cycle times.
- Spring-set air release disc brakes – one per motor.
- Splash lube filtration system.
Hoist:
- All gearing housed in a single enclosed gear case with filtered and cooled oil fed to all bearings for reliable operation.
- Large 56 in diameter hoist drum for extended rope bending life.
- Ferrule becket system and dual electric tuggers are standard for efficient rope change.
- Spring-set air release disc brakes – one per motor.
Further information on this machine can be viewed by visiting this link https://www.komatsu.com/products/electric-rope-shovels/2800xpc
Do you have one of these or similar for sale? Please click here start to list your machine for sale today.