Safeguard your wheel loader by opting for customizable waste guarding packages that include tailored guarding solutions and strategic steering wheel placement, enhancing overall visibility.
Key features include:
- Designed to protect vital machine parts, ensuring the longevity and optimal performance of critical components.
- Improved protection from airborne debris, reducing the risk of damage and enhancing the machine’s durability.
- Reduced wear on components, contributing to increased reliability and minimizing the need for frequent maintenance.
Product Features and benefits:
Cooling Screens for Optimal Airflow: Enhance effective open area for airflow while minimizing debris reaching the coolers with our specially designed cooling screens. This innovation ensures efficient cooling performance, contributing to the longevity and optimal functioning of the equipment.
S Mode and Traction Control for Tire Preservation: Prevent unnecessary tire spinning and reduce wear with the S mode and traction control features. This not only extends tire life but also enhances the overall productivity of the machine, especially when operating in challenging pile conditions.
Front and Rear Frame Underguard for Comprehensive Protection: Prioritize the protection of critical components with our front and rear frame underguard. Safeguard the engine oil pan, oil drain, and fuel tank drain, reducing debris buildup. This protective measure extends to shielding powertrain and hydraulic components, ensuring the durability and reliability of your equipment.
Product Specifications for WA200-8 WH:
Engine:
- Model: Komatsu SAA4D107E-3*
- Type: Water-cooled, 4-cycle
- Aspiration: Variable geometry, turbo-charged, after-cooled, cooled EGR
- Number of Cylinders: 4
- Bore x Stroke: 4.21 x 4.88 in
- Piston Displacement: 272 in³
- Governor: All-speed, electronic
- Horsepower:
- SAE J1995 / Gross: 128 HP
- ISO 9249/SAE J1349 / Net: 126 HP
- Rated RPM: 2,000 RPM
- Fan Drive Method for Radiator Cooling: Hydraulic
- Fuel System: Direct injection
- Lubrication System:
- Method: Gear pump, force-lubrication
- Filter: Full-flow type
- Air Cleaner: Dry type with double elements and dust evacuator, plus dust indicator
- *EPA Tier 4 Final emissions certified
Transmission:
- Type: Hydrostatic, 1 pump, 2 motors with speed range select
- Travel Speed (Measured with 20.5-R25 Tires): Both Forward and Reverse
- 1st: 0 – 8.9 mph
- 2nd: 8.9 mph
- 3rd: 14.4 mph
- 4th: 23.6 mph
Axles and Final Drives:
- Drive System: Four-wheel drive
- Front: Fixed, semi-floating
- Rear: Center-pin support, semi-floating, 24° total oscillation
- Reduction Gear: Spiral bevel gear
- Differential Gear: Torque proportioning
- Final Reduction Gear: Planetary gear, single reduction
Brakes:
- Service Brakes: Hydraulically-actuated, wet disc brakes actuate on four wheels
- Parking Brake: Wet, multi-disc brake on transfer output shaft
- Secondary Brake: One of dual service brake circuits is commonly used
Steering System:
- Type: Articulated type, fully-hydraulic power steering
- Steering Angle: 38° each direction (40° to max end stop)
- Minimum Turning Radius at the Center of Outside Tire: 16 ft. 0 in
Hydraulic System:
- Steering System:
- Hydraulic Pump: Gear type pump
- Capacity (at rated RPM): 22.5 US gpm
- Relief Valve Setting: 3,000 psi
- Hydraulic Cylinders:
- Type: Double-acting, piston type
- Number of Cylinders: 2
- Bore x Stroke: 2.76 x 17.8 in
- Loader Control:
- Hydraulic Pump: Gear type pump
- Capacity: 14.3 US gpm
- Relief Valve Setting: 3,000 psi
- Hydraulic Cylinders:
- Type: Double-acting, piston type
- Number of Cylinders:
- Lift Cylinder – 2: 4.9 x 26.5 in
- Bucket Cylinder – 1: 5.9 x 19.8 in
- Control Valve: 2-spool type
- Control Positions:
- Boom: Raise, hold, lower, and float
- Bucket: Tilt-back, hold, and dump
- Hydraulic Cycle Time (Rated Load in Bucket):
- Raise: 5.7 s
- Dump: 1.9 s
- Lower (Empty): 3.2 s
Service Refill Capacities:
- Cooling System: 7.0 US gal
- Fuel Tank: 46.8 US gal
- Engine: 4.1 US gal
- Hydraulic System: 15.3 US gal
- Axle Front: 4.9 US gal
- Axle Rear: 4.8 US gal
- Transfer Case: 1.3 US gal
- DEF Tank: 3.7 US gal
Further information on this machine can be viewed by visiting this link https://www.komatsu.com/products/wheel-loaders/mid-size-wheel-loaders/wa200-8-wh
Do you have one of these or similar for sale? Please click here start to list your machine for sale today.
