Unleash the potential of your underground mining operations with the Komatsu WX07. This Hard Rock Haulage LHD is meticulously crafted from the ground up, featuring a new chassis, a revamped powertrain, and an ergonomically optimized operator cabin for enhanced visibility, ultimately contributing to increased productivity. The WX07 is especially well-suited for small and narrow vein mines, particularly those employing cut-and-fill methods.
- Up to 10% More Breakout Force: The WX07 outperforms its class, providing up to 10% more breakout force compared to similar LHDs in the 7-tonne category.
- Up to 15% Faster Operating Speed: Experience efficiency at its best, with the WX07 boasting up to 15% faster operating speed when handling a loaded bucket, surpassing competitors in its class.
- 14% More Productive: Elevate productivity levels with the WX07, showcasing a 14% increase compared to other 7-tonne loaders, based on a comprehensive competitive analysis (data available on request).
Designed to meet the unique demands of underground mining, the Komatsu WX07 sets new standards for breakout force, operating speed, and overall productivity.
Product Features and benefits:
- FOPS/ROPS-Certified and Ergonomic Cabins: The WX07 cabin, certified for FOPS/ROPS, is designed to enhance operator performance with ergonomic features, intuitive controls, and comfort elements, reducing fatigue during extended shifts. The design prioritizes superior visibility from the cabin.
- Ground-Level Maintenance Design: Exceptional serviceability is ensured with ground-level access to vital maintenance components. This design facilitates fast and efficient repairs, providing added protection for the service crew.
- Data Management: Benefit from WX07’s data management features, allowing the monitoring, storage, and management of operational data. This enhances servicing, troubleshooting, training, and overall performance.
- Large 243-Liter Fuel Tank: Operate longer underground without interruptions with the WX07’s large 243-liter fuel tank (64-gallon). The substantial fuel tank volume supports extended working hours and reduces the frequency of refueling.
- Cast Z-Link and Cast Boom Cross-Tube: The WX07 boasts a reinforced boom design and refined unit geometry, resulting in an improved 20- to 22-tonne truck loading range, superior breakout force, and the fastest boom cycle in its class.
- Optimized Z-Bar Linkage: Experience powerful breakout force and enhanced material penetration with the WX07’s new Z-bar linkage. The design focuses on optimizing the attack angle for improved performance.
Product Specifications for WX07:
Operating Capacities and Weights:
- Payload: 15,400 lbs.
- Bucket Capacity: 4.0 yd³
- Operating Weight: 48,541 lbs.
Engine Power:
- Engine Rated Power – Standard: 215 HP
Capacities:
- Tramming Capacity: 15,432 lbs.
- Hydraulic Breakout Force Lift: 31,447 lbs.
- Hydraulic Breakout Force Tilt: 30,082 lbs.
- SAE Breakout Force: 27,816 lbs.
- SAE Static Tipping Load: 46,866 lbs.
- Bucket: 4.0 yd³
Weights:
- Operating Weight: 49,251 lbs.
- Total Loaded Weight: 64,683 lbs.
- Axle Weight Without Load:
- Front Axle: 21,250 lbs.
- Rear Axle: 28,001 lbs.
- Axle Weight With Load:
- Front Axle: 44,630 lbs.
- Rear Axle: 20,053 lbs.
Driving Speeds (kph) – Front and Rear:
- Unloaded:
- 1st Gear: 4.3
- 2nd Gear: 8.7
- 3rd Gear: 14.5
- 4th Gear: 25.8
- Loaded:
- 1st Gear: 4.2
- 2nd Gear: 8.7
- 3rd Gear: 14.5
- 4th Gear: 24.1
Bucket Motion Times (+/-1s):
- Dump Time: 2.00 s
- Rollback Time: 2.45 s
- Raising Time: 5.95 s
- Lowering Time: 3.45 s
Control System:
- User Interface: IQAN MD4
Structural:
- Front and Rear Frames: Welded steel box construction
- Material: A572 GR50 (CSA G40.21-50W)
Powertrain:
- Engine:
- Cummins QSB 6.7
- EPA Tier 3, MSHA/CANMET
- Output: 215 HP @ 2,100 rpm
- General:
- Air Filtration: Donaldson (dry type)
- Exhaust System: DOC
- Fuel Tank Capacity: 64 USG
- Converter: Dana C3000 series
- Lock-up: Yes
- Transmission: Dana TE14
- Shifting: Powershift with auto and manual modes
- Speeds: 4 forward / 4 reverse
- Axles:
- Front and Rear: Dana 17D
- Differential: LSD front axle, no spin rear axle
- Brakes: Spring applied, hydraulic release
- Oscillation Angle: +/- 6 deg
- Tires: Bias L5S or Radial, Size: 17.50 x 25
Hydraulics:
- Boom/Bucket Hydraulics:
- Variable displacement piston pump with load-sensing, closed center circuit design
- Single stage, double-acting dual hoist cylinders
- Single stage, double-acting dump cylinder with rod guard
- Steering Hydraulics:
- Variable displacement piston pump with load-sensing, closed center circuit design
- Controlled by an electric joystick
- Double acting dual steer cylinders
- Hydraulic Tank Volumes: 45.0 US gal
Brake System:
- Service brakes are spring applied, hydraulically released, wet multi-disk brakes on all four-wheel ends. The wheel end brakes also function as emergency and parking brakes. Brake system conforms to CAN/CSA 424.3 and ISO3450.
Electrical Equipment:
- Alternator: 24V/120A Prestolite
- Batteries (24V System): 2 x 12V
- Starter: 24V heavy duty
- Driving and Working Lights: 8 forward / 3 rear
- Cabin Lights: 3 interior lights (LED)
Further information on this machine can be viewed by visiting this link https://www.komatsu.com/products/underground-hard-rock-haulage/lhd/wx07
Do you have one of these or similar for sale? Please click here start to list your machine for sale today.
