640L II Skidder Large large a6a5

The John Deere TE 4×2 Electric Utility Vehicle is an eco-friendly and versatile solution for various utility tasks. Powered by electricity, it offers silent operation and zero emissions, making it ideal for indoor or noise-sensitive environments. Its compact yet sturdy design allows for easy maneuverability and accessibility in tight spaces. Equipped with a cargo box, it provides ample capacity for transporting materials, tools, or equipment. Whether used in agriculture, construction, or other utility applications, this John Deere electric utility vehicle stands as a reliable and efficient solution for getting the job done.

  • Electric motor with on-board charging
  • Quiet, zero-emissions operation
  • External LED battery charge indicator
  • Large versatile cargo box

Product Features for John Deere TE 4×2 Electric Utility Vehicle: 

  1. Dynamic Braking: The motor applies braking when the accelerator is released, serving as an additional safety measure.
  2. Overspeed Control: Prevents high-speed situations, particularly useful when descending hills, ensuring controlled operation.
  3. Roll Away Prevention: Limits vehicle speed to prevent freewheeling down grades when left unattended, enhancing safety.
  4. Reduced Speed in Reverse: Maintains a controlled speed of approximately 13 km/h (8 mph) in reverse without sacrificing torque.
  5. Anti-Rollback: Prevents the vehicle from freewheeling in the opposite direction when stopped on a grade, enhancing stability.
  6. Regeneration: Energy is converted back into the batteries during certain conditions, increasing efficiency and extending run time.
  7. Diagnostics: Onboard computer aids in diagnosing electrical system issues for efficient troubleshooting.
  8. Speed Control: Controller is set for a maximum vehicle speed of 20.92 km/h (13 mph), ensuring safe operation.
  9. Key-off Control: Allows interlock and safety features to function even with the key in the off position.
  10. Directional Change Control: Ensures smooth transitions between forward and reverse, preventing stress on the drivetrain.

Product Specifications for John Deere TE 4×2 Electric Utility Vehicle: 

 

  • Electrical System:
    • Voltage: 48 V
    • Battery Capacity: 12 kWh (Eight Trojan T-105 batteries)
    • Charger Type: High frequency switched-mode
    • Other features: Battery discharge indicator, reverse warning indicator, operator presence switch, hour meter, headlight switch, two cup holders, glove box
  • Motor and Controller:
    • Motor: Wound direct drive, 48 VDC separately excited
    • Controller: Separately excited, maximum 400 amp
    • Features: Anti-roll away braking and alarm, anti-stall motor protection, regenerative braking, diagnostic indicator, full torque, reduced speed reverse
  • Drive System:
    • Type: Dual rear wheel mechanical drum
    • Park brake: Hand operated, multi-latch
  • Brakes:
    • Type: Dual rear wheel mechanical drum
    • Front: Two 22×9.5-10, 4-ply high-flotation turf tires
    • Rear: Two 24×12-10, 4-ply high-flotation turf tires
  • Suspension and Steering:
    • Front Suspension: Independent, spring over shock, single A-arm
    • Rear Suspension: Two high-flotation, low pressure tires
    • Steering: Rack and pinion
  • Dimensions and Weight:
    • Height: 1130 mm (44.5 in)
    • Width: 1524 mm (60 in)
    • Length: Without bumper: 2664 mm (104.9 in), With bumper: 2728 mm (107.4 in)
    • Ground Clearance: Under transaxle: 196 mm (7.7 in), Under foot platform: 185 mm (7.3 in)
    • Wheelbase: 194 cm (76.4 in)
    • Vehicle Weight: 630 kg (1389 lb)
    • Turning Clearance Circle: 6.7 m (22 ft)
  • Cargo Box:
    • Type: Professional high back bucket, tilt forward
    • Seating Capacity: Two
    • Capacity: 272 kg (600 lb)
    • Volume: 460 L (16.4 cu ft)
  • Frame:
    • Type: Mig welded uni-body, high strength steel
  • Charger:
    • Input voltage: 120 VAC 60 Hz
    • Input amperage (Nominal): 12 amp, Breaker maximum: 15 amp
    • Output voltage: 48 VDC nominal
    • Output amperage: 21 ADC
    • AC input connector: IEC320/C14
    • AC power cord: 2.4 m (94 in)
  • Other Standard Features:
    • Fenders and hood: TPO – Rubber and Polypropylene

Further information on this machine can be viewed by visiting this link https://www.deere.com/en/gator-utility-vehicles/traditional-gators/te-4×2-electric-utility-vehicle/

Do you have one of these or similar for sale? Please click here start to list your machine for sale today. 

DISCLAIMER: The information that has been provided in this article is sourced from https://www.deere.com. The author does not assume any responsibility or liability for the accuracy, completeness, or usefulness of the information provided. The author shall not be held liable for any loss or damage resulting from the use of this content. For further information please contact the manufacturer directly.