POLAR cuttingsystems120 teaser

Non-printed materials processed with separating cuts and trimmed on all four sides, or other suitable print products, do not require jogging.

A High-Speed Cutter without peripheral equipment can achieve up to 20% higher output.

Improved ergonomics result from reduced lifting of heavy loads during loading or unloading.

Operator productivity remains consistently high.

The High-Speed Cutter offers significant economic potential, thanks to POLAR OptiKnife technology, easy operation, top-notch service, and excellent resale value.

Description

The Stack Lift enables the operator to load the material into the High-Speed Cutter at an ergonomic height by automatically lifting the material to be cut. The core component of the Cutting System is the POLAR High-Speed Cutter. The high-speed cutter has extensive features in the standard equipment, which can significantly increase productivity. The Lift is also utilized for stacking the material. It can be equipped with an angular board (optional) to facilitate the manual stacking of cut reams. In this scenario, the lift is lowered semi-automatically. This means that the procedure is initiated manually but halted automatically by the light barrier.

Customer Benefits

  • Achieve up to 20% higher output compared to a High-Speed Cutter without peripheral equipment.
  • Experience improved ergonomics due to reduced lifting of heavy loads during loading or unloading.
  • Maintain a constant productivity curve for operators.
  • Benefit from the significant economic potential offered by the High-Speed Cutter, attributed to features like POLAR OptiKnife, user-friendly operation, exceptional service, and high resale value.

Technical Data

Diagonal [cm]Stack Lift (L)High-Speed Cutter
Recommended (alternative)		Stapellift (L)
46 x 64 79LW 450-2POLAR 78LW 450-2
52 x 72 89LW 450-2POLAR 92 (78)LW 450-2
63 x 88 109LW 1200-4POLAR 115 (92)LW 1200-4
75 x 105 129LW 1200-4POLAR 137 (115)LW 1200-4
89 x 126 155LW 1200-6POLAR 155 (137)LW 1200-6

 

Further information on this machine can be viewed by visiting this link
https://www.heidelberg.com/gb/en/finishing/cutting/cutting_systems/cutting_systems
_overview.jsp

Do you have one of these or similar for sale? Please click here start to list your machine for sale today.

DISCLAIMER: The information that has been provided in this article is sourced from https://www.heidelberg.com/gb/en/index.jsp. The author does not assume any responsibility or liability for the accuracy, completeness, or usefulness of the information provided. The author shall not be held liable for any loss or damage resulting from the use of this content. For further information please contact the manufacturer directly.